Cart
0

SG-1 Super Groove

Vertere’s Record Player SG-1 Super Groove is designed and built to exactly the same high standards as the RG-1 Reference Groove. As with RG-1, using the best possible materials and the highest standards of precision, every single component is specially engineered and custom built.

MAIN BEARING ASSEMBLY
Directly derived from the unparalleled RG‐1 main Bearing, the SG-1 performs second only to the RG‐1. Based on the same design, geometry and similar precision engineering techniques, the SG‐1 bearing is made to our highest standards. Both RG‐1 & SG‐1 main bearings are lubricated with Vertere proprietary formulated L‐1G record player main bearing oil.

RECORD PLAYER MOTOR
Using precision bearings to articulate the proprietary aluminium alloy motor housing keeps the motor continuously synchronous achieving constant belt tension. Simply put, it drives the platter at constant speed without interference.

MAIN PLATTER
SG-1 platter assembly is a unique two piece super precision machined aluminium alloy design that provides friction-only damping of the platter assembly. The main platter has a critically designed surface profile on its top side that perfectly matches the underside of the reference platter insert. The two parts fit so precisely that the assembly creates a linearly damped, non‐resonant structure.

TEMPO MOTOR DRIVE
It is absolutely critical that the record player motor is powered and controlled faultlessly to ensure a full and musical performance of the record player. The new Tempo takes control of the record player motor and provides it with smoother drive with lower noise and lower distortion. Its internal circuit as with the reference motor drive is uniquely microprocessor based providing a pure sine wave in the digital domain and then converted to analogue via an on-board DAC. Two waveforms are derived, a cosine and a sine, which are then amplified using two bridged amplifiers to power the motor.

SG-1 RECORD PLAYER DUST COVER
There is an optional dust cover that fully encloses the RG-1 while aesthetically complimenting the elegant lines and design of the record player. The main section covering the top, front and the back is a one piece 6mm clear cast acrylic providing support and rigidity with cut-outs for motor drive and tonearm cables. The sides are made from 3mm clear cast acrylic also including hand-grip cut-outs for easy placement and removal of the cover. A Vertere emblem, laser engraved on the top adds the finishing touch to this elegant and practical record player dust cover.

SPECIAL METALLIC FINISHES
Vertere Special Metallic Black, Pearlescent White & Champagne finishes are now available for the SG-1 record player at a premium. Following in the footsteps of the RG-1, these lustrous, vibrant colours provide perfect alternatives to the original Clear finish of the SG-1. Clear cast acrylic was carefully selected for SG-1’s plinth material as it provides the most stable and acoustically suitable platform for all its critical components. The specially formulated paint and method of printing of these glistening finishes enhance the aesthetics without any compromise in performance of the SG-1 record player. The Vertere emblem printed on the top plinth adds the final finishing touch.

TECHNOLOGY
Key feature of the Vertere Record Player SG-1 Super Groove is the same structural coherence as you find on the RG-1 Reference Groove. Both record players use the same high-speed synchronous motor and they have the same structural design, incorporating compliance that isolates the record-playing platform from unwanted movements, whether internally or externally induced. The external motor drive power supply unit ensures constant speed and smooth running of the motor, which in turn is enclosed and articulated in exactly the same way as with the RG-1.

The differences between the SG-1 Super and the RG-1 Reference are in the bearing and platter assembly. The SG-1 platter system makes use of a high-grade one-piece aluminium alloy platter with a 3mm thick bonded acrylic facing to provide the record interface. The main bearing of the SG-1 utilises a precision ground hardened stainless steel spindle and a super precision tungsten carbide ball. The SG-1 shares the same plinth structure design and components as used on the RG-1 and provides the optimum platform for the tonearm and cartridge to work on. There is a pathway to upgrade the SG-1 to the RG-1, by simply replacing the main bearing and platter assemblies if and when desired.

The Record Player SG-1 Super Groove will bring any record collection to life and provide many years of musical enjoyment.

Type

Belt drive

Motor

24 Pole Synchronous 6
Point Body Contact Support
Spindle Support Acetal Ball Bearing

Motor Mount

Acetal Platform – Articulated
2 Ball Race Bearings and Silicone Motor Spring

Pulley

Super Precision Aluminium Alloy

Drive Belt

Precision Ground Polymer

Platter SG-1

Super Precision Aluminium Alloy
Single Piece
3mm Bonded Acrylic Record Interface

Bearing Spindle SG-1

Precision Hardened Stainless Steel
Roundness / Concentricity and Finish < 2 Micron

Bearing Housing SG-1

High Copper Content Phosphor Bronze
Clearance < 6.5 Microns

Plinth Structure

Clear Cast Acrylic with optional finishes
Special Metallic Black or
Metallic Pearlescent White and Metallic Champagne
30mm Thick Top and Bottom Plinths
25mm Thick Sub-plinth and 15mm Mid-plinth

Isolation System

3 Stage Compliant and 2 Stage Rigid
12 Decoupler Sets and 12 Tuned Silicone Ring / Bobbins
3 Stage Compliant and 2 Stage Rigid

Motor Drive P/S

Microprocessor Controlled & Programmable

Speeds

33.3 and 45 rpm (<0.2%)

Wow and Flutter

<0.1%

Rumble

<-85dB

19077 21760 

Shipping time

up to 1 week

SKU: 2174 Category: